First, the correct use of lubricating oil
In order to maintain the working performance of the tool, a small amount of lubricating oil must be used frequently. Please add a few drops of lubricating oil before each use.
The use of our lubricants is essential for the service life of pneumatic tools. Do not use clean oil or oil with any additives. Improper use of lubricating oil will damage the internal parts of the tool.
Second, the use of air filter and oil wood separator, the water and dust in the air is the main cause of wear nail gun, so the filter must be installed to reduce wear, filter in purification
The air must be kept clean and efficient, the filter needs to be cleaned frequently, if the filter is dusty or clogged, then the air pressure is
It will reduce the performance of the nails.
Third, the use of cold notice
In the winter below zero, it is necessary to prevent the air compression pipe icing measures, it is recommended to use the company's winter lubricant and antifreeze.
Staple gun
The nail gun uses the powerful air pressure generated by the air pump (air compressor) to drive the top hammer in the nail gun, and the top hammer does the hammering movement to the row of nails in the row of nails such as the object or the row of nails are ejected out.
The pneumatic nail gun exhaust structure: The front exhaust and the rear exhaust two action nail gun working principle: The nail gun is composed of the gun body and the magazine. The gun body assembly is composed of the gun body, cylinder, balance valve, switch assembly, firing pin assembly (gun tongue), cushion, etc., using compressed air and atmospheric pressure difference, through the trigger switch to make the firing pin (piston) in the cylinder reciprocating movement; The magazine part is composed of the gun head, gun cover, fixed magazine, movable magazine and other accessories. The nail is sent to the slot of the gun cover through the pressure spring or the tension spring. When the firing pin comes out, the nail is punched out.
