What is a curling nail? As the name suggests, the rolled up single long nail is the rolled nail, its design and general nails have many differences, it is also used in soft and hard wood, furniture correction manufacturing, soil wall sand, goods packaging and cars.
It is generally used for the decoration and decoration of shopping malls and families, and the construction of construction sites. It is a nail without a nail head, and there is no trace after it is laid, which is especially suitable for the decoration.
It is also a frequently used accessory in ordinary production, which can reduce the labor of physical force and improve production.
The roll nails are arranged and connected by a number of individual nails of the same shape at a flat interval, and the copper-plated iron wire connecting pieces are connected with the nails and then rolled into a roll in the direction of β viewpoint from the center line of each nail rod.
Coil nails also have grain nails, steel nails, code nails, cement steel nails, wood screws and so on.
Roll nails are applied using a roll nail gun, so how is the roll nail gun identified? Mainly from the following aspects of identification.
Advantages of nail roll: The advantage of large pneumatic tools is that the strength is large, according to the description criteria, in the standard standard, the right length of a nail into the wood, our pneumatic nail roll gun only needs 0.1 to 0.3 seconds, and the smaller the standard the higher the speed; Yuan nail is driven deep into the wood! When you pull the trigger and press it firmly, there is no way to keep it completely inside the wood, and you can't even turn when you want to hit the nail halfway! The wood was firmly embedded. High speed and low labor intensity, high efficiency.
The workers using the pneumatic nail gun and the workers using the hammer compete together when the wood is laid (that is, all the necessary work organization is prepared, only the carpenter needs to start when the nail is hammered), and the worker using the nail gun can work continuously for 3 hours without rest, and the speed of 10 carpenters using the hammer to knock the nail thoroughly! And the carpenter who used the hammer to hammer the nails was now tired and urged to stop and rest! And the workers who use the nail gun can still continue to work normally.
Good economic benefits: high speed, good quality, 100% nails can be used, cut workers by at least 75%, that is, the practice of the construction site to 100 workers, now 25 can be completed in the same time.
